Products

The FCS carver glass fin is specifically designed for the FCS II System. A good balance of speed, flow, and response. Suitable for all conditions. Though a quad rear, they work well as a 2 + 1 on a fun shape or performance longboard.

The FCS carver molded flex fin is specifically designed for the FCS II System. A good balance of speed, flow, and response. Suitable for all conditions. Though a quad rear, they work well as a 2 + 1 on a fun shape or performance longboard.

Introducing the new FCS II Tool-less Flow Performance Glass Longboard Fins, the new longboard fins can be secured into a fin box without the need for a screw and plate. It takes just seconds to insert and remove the fins, or make subtle adjustments mid surfing session. The Flow is a nuetral fin with an elongated base, it provides excess drive and...

Introducing the new FCS II Tool-less Pivot Performance Glass Longboard Fins, the new longboard fins can be secured into a fin box without the need for a screw and plate. It takes just seconds to insert and remove the fins, or make subtle adjustments mid surfing session. The Pivot is an upright fin with minimal sweep and base, loose for performing tighter...

Introducing the new FCS II Tool-less Connect Performance Glass Longboard Fins, the new longboard fins can be secured into a fin box without the need for a screw and plate. It takes just seconds to insert and remove the fins, or make subtle adjustments mid surfing session.Having been in development for some time, the new longboard fins have already proved successful....

Introducing the new FCS II Tool-less Connect Glass Flex Longboard Fins, the new longboard fins can be secured into a fin box without the need for a screw and plate. It takes just seconds to insert and remove the fins, or make subtle adjustments mid surfing session.Having been in development for some time, the new longboard fins have already proved successful. Harley...

Save your hands, fins, and fin boxes with our patent-pending fin removal and installation system. FinPuller works with virtually any fin system. It’s small, compact and the removal and installing process is effortless and smooth. Made of recycled materials and 1% of all profits go to the ocean conservancy. Designed in California

The Futures Fins, 413 uses the Thermotech fin material. Not only do these fins look great, in fact, in a board they look like a glass on. Most importantly, they feel unbelievably smooth and the performance is incredible. These fins do not have the traditional plastic feel of a composite fin. Instead, they have a very consistent flex that holds...

O'Fishl SW longboard sidefins  4-1/8" designed for O'fishl fin boxes only. Designed by Steve Walden, this fin is a slightly deeper, longer fin with a narrower base which keeps the holding power on a rail and creates lesstracking on cutbacks. These fins allow lots of speed down the lineeasy cutbacks and bottom turns. This is a fin we used on our older boards and...

The Walden "Wide Base" is our best selling fin, best suited to tri-fin longboards as a center fin. Our favorite all-around fin, tested and proven as a standard in virtually any longboard design. The Walden wide base was designed by Walden for the Magic Model.  Green floral, each fin is slightly different  

Our newest t-shirt designed especially for us by artist Al Mcwhite.  A prolific professional commercial artist & designer for more that two decades. Hailing from South Carolina, where the waves are small and everyday life ebb & flows with the tide. With a slightly sun-bleached color palette and a " less is more " vibe, his perspective is more about the...

Features a small front print and large back logo that reads "Walden Surfboards, since 1965, Ventura California". Slightly slimmer fit, 100% cotton shirt.  

Channel Island's  black tri-fin, medium. 3 fin set, one tab. Comes boxes with a CI leash cord. Recommendations: less than or equal to 165 lbs. Depth: side 4.52", center 4.36" Foil: Side: flat, center 50/50 Sale: Was 49.50 now 44.00

The FCS GL Fins are a traditional high-performance Longboard side bite fin set, designed to add speed, control, and stability to any 2+1 setup. The FCS GL Side Bite Fins also turn any FCS glass flex thruster set into a 5-Fin, when used as Quad Rears.

The Walden Magic Hatchet fin is a wide base traditional fin designed for noseriding yet it still has enough rake for easy turns. Size: 8" only 

This is a version of our Walden "Wide Base" fin, it's  our best selling fin, best suited to tri-fin long boards as a center fin. Our favorite all around fin, tested and proven as a standard in virtually any longboard design. The Walden wide base was designed by Walden for the Magic Model.  This is a abstract pigmented resin glass fin,...

Our Walden + Surftech stock models are not sold with fins. If you need fins, this is the set. Our 7" center fin and FCSII side fins. Center fin comes in Clear of smoke. Side fins are always black  The Walden "Wide Base" is our best selling fin, best suited to tri-fin longboards as a center fin. Our favorite all-around...

Our Walden + Surftech stock models are not sold with fins. If you need fins, this is the set. Our 8" center fin and FCSII side fins. Center fin comes in Clear of smoke. Side fins are always black  The Walden "Wide Base" is our best selling fin, best suited to tri-fin longboards as a center fin. Our favorite all-around...